 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Tibbo EM100 SERIAL - ETHERNET konverter LAN/WAN Az informatikaban alltalanosan elterjedt EIA RS232 szabvanyu interfeszt igen sok eszkoz hasznalja. Vonalkodolvasok, kartyaolvasok, penztari terminalok, banki hitelkartyaterminalok, es meg egy sereg elektronikus eszkoz. Az EM100 segitsegevel mindezeket az eszkozoket csatlakoztathatjuk az Ethernet alapon lokalis, vagy akar a globalis Internethalozatra. Angolnyelv reszletes adatlap ver 2.1a Bevezet Az EM100 (soros eszkozkiszolgalo) egy nyaklemez szint alkatresz amely egy 10BaseT Ethernet csatlakozast tesz lehetve a soros eszkoznek. Igen kis (46x28x13 mm) meretekkel rendelkez integralt aramkor. Idealis valasztas az olyan OEM fejlesztknek, akik sajat eszkozuket az Ethernet halozatra szeretnek egyszeren csatolni. Az alapertelmezett uzemmodban a Windows operacios rendszerbl egyszer szabvanyos soros port emulacio lathato, a tavoli kihelyezett Ethernet halozaton tavoli eszkozzel ugyan ugy kommunikalhatunk mint ha helyben volna a soros portunkra kotve. Tulajdonsagok 10BaseT Ethernet csatlakozas Soros (TTL) interfesz amelyet kozvetlenul csatolhatunk UARTokra, mikroprocesszorra, mikrokontrollerre, stb. Kompakt meret 46x28x13 mm A soros port kepes full-duplex es half-duplex kommunikaciora 6 lab hasznalhato alltalanos celu taviranyitott I/O labnak A mkodeshez csupan egy IC-n kivuli RJ45 csatlakozo szukseges Atlatszo adataramlast tesz lehetve a 10BaseT Ethernet halozat, es a soros port kozott TCP vagy UDP protokolon kommunikal Rugalmasan allithato parameterek Minden beallitas tavolrol a halozatrol, es a keszulek soros portjarol is allithato Tamogatja az "over-the-network configuration" az IP-cim beallitasahoz Tamogatja az "on-the-fly" parancsokat a kommunikacios sebesseg, paritas, ... azonnali adatfolyam kozbeni atallitasara A bels gyari bios-program cserelhet a hardver megbontasa nelkul A csomagban a Tibbo Device Server Toolkit (TDST) programot benne a Virtual Serial Port Driver (aka. COM redirector), es convenient setup es management eszkozmeghajto programokat talalhatjuk Teljes kompatibilitas a ESS3 Ethernet Szerverrel (mivel az a termek EM100 eszkozon alapul)... CE es FCC-engedelyek Alkalmazasi teruletek A EM100 -at szeles korben felhasznalhatja keszul soros eszkozeihez, mint pedaul... Adatgyjt es biztonsagtechnikai terminalokhoz: Beleptetk Biztonsagtechnikai eszkozok Blokkoloorak Ajtonyitok Tavszenzorok, es mereszkozok: Tapellatas szenzorok Tapellatas merk Kornyezeti monitorok Hmerseklet merk Adat naplozok Automata-azonosito beolvasok: Vonalkod olvasok Magneskartya olvasok RFID Olvasok (proximity) Razjtablak PC-mentes beleptet rendszerek Laboratoriumi eszkozok Soros nyomtatok PBX allomasok es sok sok mas... Tervezze ra az Tibbo EM100-at az on nyaklapjara, es keszuleke rakapcsolodik az Ethernethalozatra, ill. az Internetre. Tipikus kapcsolasi sema az EM100 alapu soros eszkoz kiszolgalasara. Eszkozmeghajto, es firmware programok letolthetek Introduction EM100 Embedded Ethernet Module Introduction EM100 is a board-level component that adds an Ethernet port to your serial device. Very compact (46x28x13 mm) and highly integrated, the EM100 will fit practically on any PCB. The EM100 is ideal for OEMs wishing to add network capabilities to their Products. Features Board-level component, installs on the PCB Can be used as a communications coprocessor or as a main building block of a standalone device, similar to the DS100 (see the schematic diagrams here) 10BaseT Ethernet port on one "side" Serial (TTL) interface on another "side"- connects directly to the serial port pins of UARTS, microprocessors, microcontrollers, etc. Very compact, dimensions only 46x28x13 mm Serial port supports full-duplex and half-duplex communications Up to 6 pins can be used as remotely controlled general-purpose I/O pins Communicates with other stations on the network using TCP or UDP protocols Highly integrated, only one external component- RJ45 connector- is needed Flexible, has many adjustable functioning parameters (Settings) All settings can be configured through the serial port or over the network Supports over-the-network configuration of IP-address Supports on-the-fly commands for immediate remote change of serial port parameters (baudrate, parity, etc.) and general-purpose I/O pins manipulation Fully compatible with the DS100 Serial Device Server (in fact, the DS100 is based on the EM100) Internal firmware can be upgraded in the field Supplied with the Tibbo Device Server Toolkit (TDST) software including the Virtual Serial Port Driver (aka. COM redirector), convenient setup and management utilities EM100SK Starter Kit available CE and FCC-approved Applications The EM100 can be used to network-enable many existing Serial Devices, such as... Data collection & security terminals: Access Control Terminals Security Devices Time Recorders Warehouse Terminals Shop floor automation Terminals Auto-ID Scanners: Barcode Scanners Magnetic Card Readers RFID Readers Electronic Signboards PC-less entry systems Remote Sensors & Meters: Power monitors Power meters Environmental monitors Temperature monitors Data loggers Low-cost educational systems Vending Machines POS Systems Laboratory instruments Serial printers PBX Stations and many, many others... Frissitve: 2003.08.14 WebMaster: KR (c) 2003 Procontrol Electronics LTD OnLine Minden Jog Fenntartva. vissza a flapra |
Price & Availability of EM100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |